Braun Stimuplex HNS 11 HNS 11 Uživatelský manuál stáhnout pdf (Strana 9)

The LED displays

All LEDs directly assigned to the buttons are used to monitor the

selected operating mode. Since LEDs require relatively high power,

the Stimuplex

HNS 11 switches them off after 8 seconds (see p. 6

Section 7).

The individual displays have the following significance:

Current display mode

The LCD display shows the stimulation current set ( ).

The LCD display shows the stimulation current actually flowing

(

). In addition, a ”

” appears in front of the current displayed.

Current adjustment range

Setting range from 0.00 to 5.00 mA:

Use the controller to dial a stimulation current up to 5 mA. The

current is displayed in 0.02 mA digits.

Setting range from 0.00 to 1.00 mA:

Use the controller to dial a stimulation current up to 5 mA. The

current is displayed in 0.01 mA digits.

Pulse width

Pulse width 1.0 ms: duration of stimulation pulse is 1.0 ms.

Pulse width 0.3 ms: duration of stimulation pulse is 0.3 ms.

Pulse width 0.1 ms: duration of stimulation pulse is 0.1 ms.

Pulse frequency

Pulse frequency 2 Hz (two pulses per second)

Pulse frequency 1 Hz (one pulse per second)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Žádné komentáře

Braun Stimuplex HNS 11 HNS 11 Uživatelský manuál Strana 9